A protective layer on the active layer of Al-Zn-Sn-O thin-film transistors for transparent AMOLEDs

8Citations
Citations of this article
12Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Transparent top-gate Al-Zn-Sn-O (AZTO) thin-film transistors (TFTs) with an Al2O3 protective layer (PL) on an active layer were studied, and a transparent 2.5-inch QCIF+AMOLED (active-matrix organic light-emitting diode) display panel was fabricated using an AZTO TFT backplane. The AZTO active layers were deposited via RF magnetron sputtering at room temperature, and the PL was deposited via two different atomic-layer deposition (ALD) processes. The mobility and subthreshold slope were superior in the TFTs annealed in vacuum and with oxygen plasma PLs compared to the TFTs annealed in O2 and with water vapor PLs, but the bias stability of the TFTs annealed in O2 and with water vapor PLs was excellent. © 2009 Taylor & Francis Group, LLC.

Cite

CITATION STYLE

APA

Cho, D. H., Park, S. H. K., Yang, S., Byun, C., Cho, K. I., Ryu, M., … Hwang, C. S. (2009). A protective layer on the active layer of Al-Zn-Sn-O thin-film transistors for transparent AMOLEDs. Journal of Information Display, 10(4), 137–142. https://doi.org/10.1080/15980316.2009.9652097

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free