Tribology of graphite-filled polystyrene

Abstract

Self-lubricating polymer compounds are currently used for a wide range of applications such as bearings, gears, and water meters. Under severe conditions such as high pressure, high velocity, and/or high temperatures, the material fails (PV limit). In this study, we investigated the effect of graphite on the tribological properties of polystyrene (PS) with "ball-on-three-plates" tests. Graphite-filled PS plates were produced via an internal mixer and compression molding. Unhardened steel (1.4401) and nylon (PA66) balls were used for the tribological tests. Our results indicate that graphite loading, graphite type, and particle size have a big influence on the friction coefficient, the wear resistance, and the PV limit of PS both against steel and PA66. In particular, primary synthetic graphite performs better than secondary synthetic graphite due to the higher degree of crystallinity.