Interdigitated flow channel on a proton exchange membrane fuel cell investigated using the response surface methodology

Abstract

Performance of the proton exchange membrane (PEM) fuel cell depends on the operating pressure, operating temperature, stoichiometric ratio of reactant gases, relative humidity, and rib width-to-channel width ratio (R:C), shape of the flow channel, and the number of passes on the flow channel. The effect of pressure, temperature, inlet reactant mass flow rate and rib width-to-channel width ratios of 1:1, 1:2, 2:1, and 2:2 on the power density of a PEM fuel cell with interdigitated flow channel of 25 cm2 active area of was considered in this study. The response surface methodology was used for optimizing the four above mentioned parameters to find the optimum power density of the PEM fuel cell. The analysis of variance (ANOVA) was used to find the contribution of each parameter to the performance of the PEM fuel cell. Further, numerical results were compared with the experimental validation of the PEM fuel cell. Numerical results of power densities of interdigitated flow channel with R:C ratios of 1:1, 1:2, 2:1, and 2:2 were found to be 0.272, 0.292, 0.267, and 0.281 W/cm2 and the corresponding experimental results of power density were 0.261, 0.266, 0.254, and 0.264 W/cm2, respectively.