On the detachment of the gelatinous layer in tension wood fiber

52Citations
Citations of this article
42Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The detachment of the gelatinous layer (G-layer), often observed on microtome cross sections, has led some authors to believe that the G-layer cannot act as the driving force of longitudinal shrinkage in tension wood. The aim of this study was to observe the detachment of the G-layer along fibers. Green wood blocks were cut transversely into two samples. One sample was kept in water and the other was oven-dried. With one face being common to both samples, the detachment of the G-layer was studied on the same fibers. Observations were performed after blocking deformation by embedding. This revealed that the detachment of the G-layer is an effect produced by the act of cutting the transverse face of the wood block to be embedded. At distances greater than 100 μm from this primary surface of the sample, no detachment was observed. Drying shrinkage shows little or no effect on this detachment. The result seems to explain well why the detachment of the G-layer occurs during sectioning using conventional sliding microtomy. These observations prove the adhesion of the G-layer in massive wood and confirm the active role of the G-layer in tension wood properties. © The Japan Wood Research Society 2005.

Cite

CITATION STYLE

APA

Clair, B., Thibaut, B., & Sugiyama, J. (2005). On the detachment of the gelatinous layer in tension wood fiber. Journal of Wood Science, 51(3), 218–221. https://doi.org/10.1007/s10086-004-0648-9

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free