Effect of the Composition of Oxide on the Reaction between Oxide and Sulfur during Solidification of Steels

23Citations
Citations of this article
6Readers
Mendeley users who have this article in their library.

Abstract

In order to elucidate the reaction between oxides and sulfur in molten steel during solidification, the effect of composition of oxides in continuously cast steels has been observed and analyzed. The results obtained are as follows. CaO-SiO2-Al2O3 and CaO-SiO2 oxides are observed in low Al content steel (Al = 0.005 mass%) and CaO-Al2O3 oxides are observed in high Al content steel (Al = 0.031 mass%). CaO-SiO2-Al2O3 and CaO-Al2O3 oxides have higher S content than CaO-SiO2 oxides. High S content in oxides was obtained with high liquid fraction and high sulfide capacity of oxides at the solidification temperature of the steel. Because desulfurization by oxides which have high sulphide capacity and high liquid fraction occurs during solidification, S segregated in the center of slab is absorbed by the oxides. © 1995, The Iron and Steel Institute of Japan. All rights reserved.

Cite

CITATION STYLE

APA

Goto, H., Miyazawa, K. ichi, & Kadoya, T. (1995). Effect of the Composition of Oxide on the Reaction between Oxide and Sulfur during Solidification of Steels. ISIJ International, 35(12), 1477–1482. https://doi.org/10.2355/isijinternational.35.1477

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free