Influence of hardening functions on earing prediction in cup drawing of AA3104 aluminum alloy sheet

Abstract

The accuracy of cup drawing simulation of aluminum alloy sheets strongly depends on the hardening and yield functions used in the simulation. In this study, stress-strain curves for an AA3104 aluminum alloy sheet were measured by uniaxial tensile and rolling tensile tests to identify parameters for various hardening functions. In addition, in-plane uniaxial tensile, biaxial tensile, and combined tension-compression tests were carried out to measure the successive contours of plastic work in the stress space and the directions of plastic strain rates under linear stress paths. The anisotropic coefficients, α 1-α 8, and exponent M of the Yld2000-2d yield function were determined so that the mean square error of the analytical yield locus from the measured plastic work contour was minimized. Finite element simulations of cup drawing of the aluminum alloy sheet were carried out using the determined parameters for hardening functions and the Yld2000-2d yield function implemented in LS-DYNA. By comparing the simulation results with the results of cup drawing experiments, the effects of the hardening functions on the accuracy of earing profile prediction were investigated.