Redox potential as a means to control the treatment of slurry to lower H2S emissions

17Citations
Citations of this article
31Readers
Mendeley users who have this article in their library.

Abstract

Slurry can be oxidized to eliminate undesirable emissions, including malodorous hydrogen sulfide (H2S). However, it is difficult to assess the optimal amount of oxidizing agent required. In this study, one cow and one pig manure, each in three particle size ranges were oxidized with 0-350 mg ozone/L manure. Redox and H2S concentration were measured continuously. During ozonation the manures gave equivalent redox potential curves. A relatively rapid rise in redox potential was observed within a range of -275 mV to -10 mV, with all manures changing as a minimum from -200 mV to -80 mV. The gaseous H2S emissions were decreased by 99.5% during the redox increase (-200 mV to -80 mV). This is attributed to H2S oxidation by ozone and oxygen, and is not due to H2S deprotonation or gas flushing. By identifying the initiation of the final redox level following the rise, the amount of ozone required to remove H2S from the manure samples was estimated to be in the range of 6-24 mg O3/L manure, depending on the type of manure. Hence, continuous monitoring of redox potential (termination of the redox rise) during the oxidation treatment is a simple method of achieving cost-effective minimization of H2S emissions from slurry. © 2012 by the authors; licensee MDPI, Basel, Switzerland.

Cite

CITATION STYLE

APA

Hjorth, M., Christina, P., & Feilberg, A. (2012). Redox potential as a means to control the treatment of slurry to lower H2S emissions. Sensors (Switzerland), 12(5), 5349–5362. https://doi.org/10.3390/s120505349

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free