High-conductivity flexible Ag films formed by low-temperature and short-time sintering of PVP-modified silver oxalate composite ink

Abstract

Attaining low-temperature sintering and high electrical conductivity is vital in the field of flexible electronics. Inks with silver oxalate as the precursor have recently received significant attention in this field; however, the high sintering temperature and long sintering time limit commercial applicability. High sintering temperature can shorten the sintering time but lead to porous and uneven film morphology; thus, reducing the conductivity. On the other hand, low sintering temperature prolongs the sintering time; thus, reducing the production efficiency. To solve the abovementioned problems, a silver composite conductive ink modified by polyvinylpyrrolidone (PVP) was prepared in this study. The ink used silver oxalate as the precursor, methanol and acetone as the solvent, and 1, 2-diaminopropane as the complexing agent, and could reduce the sintering temperature and time to 160 °C and 20 min, respectively. After sintering, the silver film showed good electrical conductivity, and low resistivity (4.56 μΩ•cm). Furthermore, the impact of sintering temperature on the surface morphology and electrical conductivity were also studied, and the results showed that PVP had a positive influence on the nucleation of silver and the microstructure of the sintered silver film.