Dissolution rate of Al2O3 into molten CaO-SiO2-Al2O3 slags

117Citations
Citations of this article
32Readers
Mendeley users who have this article in their library.

Abstract

The dissolution rate of Al2O3 into the CaO-SiO2-AL2o3 slag system was investigated at 1 873 K by employing a novel experimental method which involved continual measurement of the torque variation on a rotating alumina rod dipped into a molten slag. Measured torque variation was successfully related to the dissolution rate of the rod. The dissolution rate of alumina was found affected by a number of factors: the rate increased with increasing temperature, the rotating speed of the rod, the CaO content in the slag, and the AL2O3 content in the slag for a fixed CaO content. It was found that the dissolution rate was highly dependent on the viscosity and the diffusivity of slags. The activation energy obtained from an Arrhenius type analysis was in the range of 84 kJ mol-1. It was concluded that the dissolution of Al2O3 into the CaO-SiO2-Al2O3 slag system was controlled by the mass transfer in the slag phase. An iso-dissolution rate diagram was constructed for the dissolution of Al2O3 into the CaO-SiO2-Al2O3 slag system at 1 873 K.

Cite

CITATION STYLE

APA

Choi, J. Y., Lee, H. G., & Kim, J. S. (2002). Dissolution rate of Al2O3 into molten CaO-SiO2-Al2O3 slags. ISIJ International, 42(8), 852–860. https://doi.org/10.2355/isijinternational.42.852

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free