Effect of soil-pile contact parameters on pile bearing capacity value

Abstract

The soil and foundation elements are fundamental to the behavior of a structure. When the foundation soil has a low capacity, it is necessary to transmit the loads to a deeper and more resistant layer, using deep foundations. A pile load test is a field measurement of the bearing capacity (vertical or horizontal) of a foundation element. In addition to a physical model of a load test, the use of computational tools can bring additional understanding. In order to analyze the responses obtained by numerical models compared to field test results, tools that use Finite Element Methods (FEM) and that have a series of constitutive models become a great alternative. This paper aims to study the behavior of Continuous Flight Auger (CFA) piles, aiming to understand the soil-pile interaction regarding the effect of soil-pile contact parameters on pile bearing capacity value. In this way, experimental data from three load tests were compared with numerical simulations using the Mohr-Coulomb constitutive model. Also, a parametric study was completed based on the collected soil data from the literature of the region that most affected the settlement behavior of the load pile. It was concluded that there is a direct and significant influence of the friction coefficient on the pile bearing capacity. In addition, by incorporating more real soil data and parameters representing its actual formation, the results of the pile load test simulation can be taken as an alternative to estimate the ultimate capacity of a vertically loaded pile in the absence of the static load test, which has been widely observed in engineering practice.