Abstract
Periodic microswelling structures were photochemically induced on a silicone rubber surface using a 193 nm ArF excimer laser. Microspheres made of silica glass (SiO2) of 2.5μm diameter were aligned on the silicone rubber surface during laser irradiation; the laser beam was focused on the silicone surface underneath each microsphere. The height and diameter of the formed microswelling structures were found to be controllable by changing the Ar gas flow rate, single-pulse laser fluence, and laser irradiation time. The chemical bonding of the laser-irradiated sample did not change and thus remained to be a silicone, as analyzed by X-ray photoelectron spectroscopy. As a result, microswelling structures of approximately 1.3μm height and 1.3μm diameter were successfully obtained. The contact angles of water on the microstructured silicone were measured to be 150° and larger, clearly indicating superhydrophobicity. The mechanism by which the microswellings form their shape was discussed on the basis of the changes in the focal point and spot size during laser irradiation through the SiO2 microsphere.
Cite
CITATION STYLE
Nojiri, H., Pambudi, W. S., & Okoshi, M. (2017). Formation of periodic microswelling structures on silicone rubber surface using ArF excimer laser to realize superhydrophobic property. Japanese Journal of Applied Physics, 56(7). https://doi.org/10.7567/JJAP.56.072002
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.