Characterization of austenite decomposition in steels with different chemical concepts and high potential to manufacture seamed pipes for oil and gas industry

Abstract

This work presents the characterization of austenite decomposition kinetics in two steels during continuous cooling considering non-deformed austenite grains. Two different chemical concepts of steels were evaluated: low carbon-high manganese and a relatively new concept based on low carbon-low manganese-high niobium contents. Dilatometric experiments, microstructural characterization procedures and microhardness tests were carried out. Experimental and calculated CCT diagrams were plotted and the adapted JMAK model was applied aiming to predict the austenite decomposition kinetics. The low carbon-high manganese steel was the most sensitive to the applied cooling rates and, due to that, presented the higher grain refnement and hardness increasing after continuous cooling. These results highlight that the Mn content decreasing may promote a potential loss of grain refnement in procedures of continuous cooling where the structure recrystallization does not occur, as in some welding procedures or conventional heat treatments applied in the seamed pipe manufacturing process.