Multi-voltage domain clock mesh design

Abstract

This paper investigates the effectiveness of a multi-voltage clock network design that is built using the mesh topology. Unlike a clock tree, a single clock mesh that spans multiple voltage domains is infeasible due to the incompatibility of voltage levels of the clock drivers on the electrically-shorted mesh - each voltage domain requires a separate mesh. These disjoint meshes need to be matched in clock skew between the domains. In addition, the additional power dissipation of the level shifters in the logic needs to be compared against the power savings of multi-voltage domain implementation. The case study performed with the largest ISCAS'89 benchmark circuits operating at 500 MHz, 90 nm technology concludes two important results that highlight the benefits of multi-voltage clock mesh design: 1) The multi-voltage domain clock mesh can achieve 37.14% lower power with a 9 ps increase in clock skew over the single-voltage domain clock mesh, and 2) The multi-voltage domain clock mesh achieves 66 ps less skew with a 20.92% increase in power dissipation over a multi-voltage domain clock tree. © 2012 IEEE.