Experimental evaluation of connectors performance for modular double-skinned composite tubular wind turbine tower

Abstract

Three types of connectors were proposed and tested for a modular double-skinned composite tubular (DSCT) wind turbine tower, which is composed of two concentric steel tubes filled with concrete between them. The three proposed types were a socket type connector, an H-type connector, and a bolted–welded with shear key connector. Using the proposed connectors, three modular DSCT tower specimens and a single-body specimen were built. Then, quasi-static tests were conducted to evaluate the performance of the three types of connectors, and their behavioral characteristics and failure modes were analyzed. The test results showed that the bolted–welded with shear key connector specimen exerted an almost equal moment resisting capacity as the single-body specimen; however, the other modular specimens exerted only half the moment resisting capacity of the single-body specimen. Moreover, the results showed that the bolted–welded with shear key connector is applicable in a modular DSCT wind turbine tower as it has equal ductility, maximum lateral displacement, and energy dissipation as the single-body specimen.