Atomic Layer Deposition of HfO2 Films Using TDMAH and Water or Ammonia Water

19Citations
Citations of this article
34Readers
Mendeley users who have this article in their library.

Abstract

Atomic layer deposition of HfO2 from TDMAH and water or ammonia water at different temperatures below 400 °C is studied. Growth per cycle (GPC) has been recorded in the range of 1.2–1.6 Å. At low temperatures (≤100 °C), the films grew faster and are structurally more disordered, amorphous and/or polycrystalline with crystal sizes up to 29 nm, compared to the films grown at higher temperatures. At high temperatures of 240 °C, the films are better crystallized with crystal sizes of 38–40 nm but grew slower. GPC, dielectric constant, and crystalline structure are improved by depositing at temperatures above 300 °C. The dielectric constant value and the roughness of the films have been determined for monoclinic HfO2, a mixture of orthorhombic and monoclinic, as well as for amorphous HfO2. Moreover, the present study shows that the increase in the dielectric constant of the films can be achieved by using ammonia water as an oxygen precursor in the ALD growth. The detailed investigations of the relationship between HfO2 properties and growth parameters presented here have not been reported so far, and the possibilities of fine-tuning and controlling the structure and performance of these layers are still being sought.

Author supplied keywords

Cite

CITATION STYLE

APA

Gieraltowska, S., Wachnicki, L., Dluzewski, P., Witkowski, B. S., Godlewski, M., & Guziewicz, E. (2023). Atomic Layer Deposition of HfO2 Films Using TDMAH and Water or Ammonia Water. Materials, 16(11). https://doi.org/10.3390/ma16114077

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free