A LQR-based controller with estimation of road bank for improving vehicle lateral and rollover stability via active suspension

37Citations
Citations of this article
52Readers
Mendeley users who have this article in their library.

Abstract

In this article, a Linear Quadratic Regulator (LQR) lateral stability and rollover controller has been developed including as the main novelty taking into account the road bank angle and using exclusively active suspension for both lateral stability and rollover control. The main problem regarding the road bank is that it cannot be measured by means of on-board sensors. The solution proposed in this article is performing an estimation of this variable using a Kalman filter. In this way, it is possible to distinguish between the road disturbance component and the vehicle’s roll angle. The controller’s effectiveness has been tested by means of simulations carried out in TruckSim, using an experimentally-validated vehicle model. Lateral load transfer, roll angle, yaw rate and sideslip angle have been analyzed in order to quantify the improvements achieved on the behavior of the vehicle. For that purpose, these variables have been compared with the results obtained from both a vehicle that uses passive suspension and a vehicle using a fuzzy logic controller.

Cite

CITATION STYLE

APA

Riofrio, A., Sanz, S., Boada, M. J. L., & Boada, B. L. (2017). A LQR-based controller with estimation of road bank for improving vehicle lateral and rollover stability via active suspension. Sensors (Switzerland), 17(10). https://doi.org/10.3390/s17102318

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free