Effect of Mn and Fe on the formation of Fe- and Mn-rich intermetallics in al-5Mg-Mn alloys solidified under near-rapid cooling

Abstract

Mn was an important alloying element used in Al-Mg-Mn alloys. However, it had to be limited to a low level (< 1.0 wt %) to avoid the formation of coarse intermetallics. In order to take full advantage of the benefits of Mn, research was carried out to investigate the possibility of increasing the content of Mn by studying the effect of cooling rate on the formation of Feand Mn-rich intermetallics at different content levels of Mn and Fe. The results indicated that in Al-5Mg-Mn alloy with low Fe content (< 0.1 wt %), intermetallic Al6(Fe, Mn) was small in size and amount. With increasing Mn content, intermetallic Al6(Fe, Mn) increased, but in limited amount. In high-Fe-containing Al-5Mg-Mn alloys (0.5 wt % Fe), intermetallic Al6(Fe, Mn) became the dominant phase, even in the alloy with low Mn content (0.39 wt %). Cooling rate played a critical role in the refinement of the intermetallics. Under near-rapid cooling, intermetallic Al6(Fe, Mn) was extremely refined. Even in the high Mn and/or high-Fe-containing alloys, it still demonstrated fine Chinese script structures. However, once the alloy composition passed beyond the eutectic point, the primary intermetallic Al6(Fe, Mn) phase displayed extremely coarse platelet-like morphology. Increasing the content of Fe caused intermetallic Al6(Fe, Mn) to become the primary phase at a lower Mn content.