Sound source localization: Bandwidth and envelope

0Citations
Citations of this article
7Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Human listeners were asked to locate six sound sources separated by 15o in the right quarter field. Sound sources were located in a sound-deadened room (reverberation time < 90 ms) at the height of the listener's pinna 1.67 meters from the listener. In Experiment 1, eight, 200-ms pure tones covering the frequency range from 250 to 7011 Hz were presented. In Experiment 2, 200-ms noise bursts with different bandwidths (1/6, 1/3/, 1, and 2 octaves) at three center frequencies (250, 2000, and 4000 Hz) were presented. In Experiment 3, 200-ms, 4000-Hz tones were presented with transposed envelopes with rates of 50, 100, 150, and 250 Hz. Several indicators of sound source localization performance were measured including root-mean-square (rms) error in degrees. RMS error decreased with increasing bandwidth from approximately 20 degrees for pure tones to approximately 6 degrees for 2-octave wide noises. RMS error depended on center frequency much more for narrow bandwidths than for broader bandwidths. RMS error decreased slightly from 50-Hz rate of modulation to 250-Hz rate of modulation. The data suggest that stimulus bandwidth is the primary variable effecting sound source localization performance in the free-field. © 2013 Acoustical Society of America.

Cite

CITATION STYLE

APA

Yost, W. A. (2013). Sound source localization: Bandwidth and envelope. In Proceedings of Meetings on Acoustics (Vol. 19). https://doi.org/10.1121/1.4798809

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free