An in vitro evaluation of flexural bond strength of indirect composites fused to metal

Abstract

With the advent of newer indirect composite resin materials for crown and bridge prosthesis, it has become imperative to evaluate their strength to serve as long term replacements as a substitute to metal ceramic restorations. This study aimed to evaluate and compare the flexural bond strength of three composite resin veneering material to metal, cured by different methods. Specimen were fabricated with pattern resin by duplicating it with machined metal die and divided into three groups. Three composite resin materials were used in this study. Group (A) received Adoro, Group (B) received Targis and Group (C) received Tescera. The bond strength of all specimens was tested with Lloyd's universal testing machine under three point loading. The highest values for fracture resistance were displayed by light, heat and pressure cured composites followed by composites cured using a temperature of 104 C and composites with curing temperature of 95°C. The results indicate that there is a significant difference between the three groups, with the Tescera group specimens exhibiting the highest flexural bond strength. Of the other two groups, Adoro group exhibited higher flexural bond strength than Targis group. The results of this study suggest that Tescera group with curing temperature of 130°C and pressure of 80 Psi, cured with metal halide unit exhibited the highest flexural bond strength when compared to Adoro and Targis groups. © 2013 Indian Prosthodontic Society.