Fracture and transport analysis of heterogeneous 3D-Printed lamellar cementitious materials

5Citations
Citations of this article
15Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

This paper investigates the spatial characteristics of microstructural phases in relation to the fracture toughness in Mode-I/II and transport behavior in two orthogonal directions of lamellar 3D-printed cement paste compared to cast counterparts. Using segmentation techniques, it was found that intact 3D-printed materials represent porous interfaces and microchannels. A modified partial-notch Brazil-Nut test was proposed to characterize the Mode-I/II fracture toughness. A new laser-notching process was proposed to generate a sharp notch and account for the sensitivity of fracture processes to microstructural heterogeneities in 3D-printed materials. Unlike Mode-I, significantly higher Mode-II fracture toughness was found in 3D-printed material in the perpendicular direction compared to the cast, owing to the in/out-of-plane crack deflection along the interfaces. The porous interfacial regions were hypothesized to govern the crack initiation in both Mode-I/II. Water transport was characterized by absorption using Neutron Radiography, where interfacial heterogeneities act as capillary breaks, hence directionally influences water absorption and transport.

Cite

CITATION STYLE

APA

Gupta, S., Esmaeeli, H. S., Prihar, A., Ghantous, R. M., Weiss, W. J., & Moini, R. (2023). Fracture and transport analysis of heterogeneous 3D-Printed lamellar cementitious materials. Cement and Concrete Composites, 140. https://doi.org/10.1016/j.cemconcomp.2023.105034

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free