Analysis and Optimization of Machining Parameters of EN-47 in Turning by Taguchi Technique and Minitab-17 Software

Abstract

This experimental study presents an effective approach for the optimization of turning parameter using MINITAB 17 and Taguchi Technique in varying condition. The information about machining of difficult cutting materials is inadequate and complicated. Therefore an experimental study has to be conducted to come out with an optimum outcome. In this study, the machining parameters namely Depth of Cut, Cutting Speed, Feed Rate and cutting fluids are optimized with multiple performance characteristics, such as maximum material removal rate and maximum surface finish. The response table and response graph for each level of machining parameters are obtained from the Taguchi Method and the optimum levels of machining parameters are being selected.