Experimental characterization of mechanical properties of the cement pasteaggregate interface in concrete

Abstract

Granular materials are extensively used in the field of civil engineering. These materials are either used in their dry state, or mixed with water or with a binder. In the case of concrete, the binder could be cement or mortar. For ordinary concretes, it is generally admitted that there is a thin heterogeneous zone of paste, with a thickness of about 15-60 μm, surrounding the aggregates surface. This zone, commonly named the Interfacial Transition Zone (ITZ), is characterized by a higher porosity than the bulk paste and a high concentration of the portlandite crystals. Some of these crystals react with the aggregates' surface (limestone aggregates), leading to a good adhesion. In this work, the mechanical properties of the cement paste and of the cement-aggregate interface are experimentally analyzed. Experimental tensile and shear tests are performed on parallelipipedic samples. These samples are made by linking limestone aggregates with Portland cement paste using a water/cement ratio of 0.5. The results show that the cement-aggregate interface is the weak zone in the composite.