Compact printed arrays with embedded coupling mitigation for energy-efficient wireless sensor networking

12Citations
Citations of this article
9Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

Wireless sensors emerged as narrowband, resource-constrained devices to provide monitoring services over a wide life span. Future applications of sensor networks are multimedia-driven and include sensor mobility. Thus, sensors must combine small size, large bandwidth, and diversity capabilities. Compact arrays, offering transmit/receive diversity, suffer from strong mutual coupling (MC), which causes lower antenna efficiency, loss of bandwidth, and signal correlation. An efficient technique to reduce coupling in compact arrays is described herein: a defect was inserted in the ground plane (GNDP) area between each pair of elements. The defect disturbed the GNDP currents and offered multidecibel coupling suppression, bandwidth recovery, and reduction of in-band correlation. Minimal pattern distortion was estimated. Computational results were supported by measurements. The bandwidth of unloaded arrays degraded gracefully from 38 to 28 with decreasing interelement distance (0.25λ to 0.10λ). Defect-loaded arrays exhibited active impedance bandwidths 37-45, respectively. Measured coupling was reduced by 15-20dB. Copyright © 2010 C. G. Kakoyiannis and P. Constantinou.

Cite

CITATION STYLE

APA

Kakoyiannis, C. G., & Constantinou, P. (2010). Compact printed arrays with embedded coupling mitigation for energy-efficient wireless sensor networking. International Journal of Antennas and Propagation, 2010. https://doi.org/10.1155/2010/596291

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free