Performance and biodegradation in soil of novel horticulture containers made from bioplastics and biocomposites

Abstract

The container-crops industry relies heavily on single-use plant containers made from petroleum-based plastics, most of which contribute to the solid waste stream in landfills. Plant containers made from biorenewable materials have potential to be more sustainable, but most commercially available biocontainers are either not durable enough for common production cycles or do not effectively biodegrade in soil after use. In 2012 and 2013, we evaluated 28 novel biocontainers (injection-molded prototypes) for their performance during plant production and their biodegradation in soil at two sites with dissimilar soil and climate in Iowa and Nevada, and we compared their performance to that of commercially available biocontainers. Prototype containers made of blends or composites of polylactic acid (PLA) or polyhydroxyalkanoates (PHA) performed well during crop production, and many showed an effective rate of biodegradation in soil. Their rates of biodegradation in Nevada were either similar or lower than they were in Iowa, but the highest rated containers were acceptable for use in both locations. Adding biobased fibers of distiller’s dried grains with solubles or corn stover to form composite materials improved biodegradation over that of the base polymers (PLA or PHA) and had little effect on container performance under greenhouse conditions. Many of the injection-molded prototypes performed as well as the petroleum control containers during crop production, yet biodegraded at similar or faster rates than commercially available fiber containers.