Precipitation hardening at elevated temperatures above 400◦ c and subsequent natural age hardening of commercial al–si–cu alloy

Abstract

The precipitation of intermetallic phases and the associated hardening by artificial aging treatments at elevated temperatures above 400◦ C were systematically investigated in the commer-cially available AC2B alloy with a nominal composition of Al–6Si–3Cu (mass%). The natural age hardening of the artificially aged samples at various temperatures was also examined. A slight increase in hardness (approximately 5 HV) of the AC2B alloy was observed at an elevated temperature of 480◦ C. The hardness change is attributed to the precipitation of metastable phases associated with the α-Al15 (Fe, Mn)3 Si2 phase containing a large amount of impurity elements (Fe and Mn). At a lower temperature of 400◦ C, a slight artificial-age hardening appeared. Subsequently, the hardness decreased moderately. This phenomenon was attributed to the precipitation of stable θ-Al2 Cu and Q-Al4 Cu2 Mg8 Si6 phases and their coarsening after a long duration. The precipitation sequence was rationalized by thermodynamic calculations for the Al–Si–Cu–Fe–Mn–Mg system. The natural age-hardening behavior significantly varied depending on the prior artificial aging temperatures ranging from 400◦ C to 500◦ C. The natural age-hardening was found to strongly depend on the solute contents of Cu and Si in the Al matrix. This study provides fundamental insights into controlling the strength level of commercial Al–Si–Cu cast alloys with impurity elements using the cooling process after solution treatment at elevated temperatures above 400◦ C.