A fast-locking all-digital phase-locked loop with dynamic loop bandwidth adjustment

45Citations
Citations of this article
31Readers
Mendeley users who have this article in their library.
Get full text

Abstract

A fast-locking all-digital phase-locked loop (ADPLL) including a fast-locking unit, a multi-level bang-bang phase detector (ML-BBPD), a dynamic gain adjustment controller (DGAC), and a digitally controlled oscillator (DCO) is presented. The ML-BBPD provides multi-level outputs with different phase errors. According to the detection results of ML-BBPD, the DGAC can adjust the dynamic integral gain of digital loop filter to provide four different operation modes and keep the ADPLL always in stable operation for fast-locking procedure. The DCO with loading compensation circuit can decrease the difference of tuning range in 13 bands less than 25%. Implemented with a 0.18-μm CMOS technology, the area of the core circuit is 0.7735 mm2 and the total power consumption is 35 mW from a 1.8 V supply voltage at 1.25 GHz. The ADPLL can generate output frequencies from 253.9 MHz to 1.367 GHz with 12-phase output clocks. Experimental result shows that the locking time can be accomplished in 2.9184 μs, i.e., 57 cycles with a 19.53125 MHz reference clock. The phase noise is 108.77 dBc/Hz at 1 MHz frequency offset, and measured rms jitter and peak-to-peak jitter are 8.884 ps and 32.5 ps respectively.

Cite

CITATION STYLE

APA

Lin, J. M., & Yang, C. Y. (2015). A fast-locking all-digital phase-locked loop with dynamic loop bandwidth adjustment. IEEE Transactions on Circuits and Systems I: Regular Papers, 62(10), 2411–2422. https://doi.org/10.1109/TCSI.2015.2477575

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free