Upgrading of bio-syngas via steam-CO2 reforming using rh/alumina monolith catalysts

Abstract

Steam-CO2 reforming of biomass derived synthesis gas (bio-syngas) was investigated with regard to the steam concentration in the feed using Rh-loaded alumina foam monolith catalysts, which was also accompanied by thermodynamic equilibrium calculation. With 40 vol % steam addition, steam methane reforming and water gas shift reaction were prevailed at the temperature below 640 °C, above which methane dry reforming and reverse-water gas shift reaction were intensified. Substantial change of activation energy based on the methane conversion was observed at 640 °C, where the reaction seemed to be shifted from the kinetic controlled region to the mass transfer controlled region. At the reduced steam of 20 vol %, the increase in the gas velocity led to the increase in the contribution of steam reforming. Comparing to the absence of steam, the addition of steam (40 vol%) resulted in the increase in the production of H2 and CO2, which in turn increased the H2/CO ratio by 95% and decreased the CO/CO2 ratio by 60%. Rh-loaded alumina monolith was revealed to have a good stability in upgrading of the raw bio-syngas.