Asphalt Binder Modification with Plastomeric Compounds Containing Recycled Plastics and Graphene

Abstract

Polymer-modified bitumens are usually employed for enhancing the mixture performance against typical pavement distresses. This paper presents an experimental investigation of bitumens added with two plastomeric compounds, containing recycled plastics and graphene, typically used for asphalt concrete dry modification. The goal was to study the effects of the compounds on the rheological response of the binder phase, as well the adhesion properties, in comparison with a reference plain bitumen. The blends (combination of bitumen and compounds) were evaluated through dynamic viscosity tests, frequency sweep tests, and multiple stress creep recovery (MSCR) tests. Moreover, the bitumen bond strength (BBS) test was performed to investigate the behavior of the systems consisting of blends and aggregate substrates (virgin and pre-coated). The rheological tests indicated that both blends performed better than the plain bitumen, especially at high temperature, showing an enhanced rutting resistance. In terms of bond strength, comparable results were found between the blends and reference bitumen. Moreover, no performance differences were detected between the two types of blends.