La(OH)3 nano-rods/polyacrylonitrile nanofibers: Fabrication, characterization and application for phosphate removal

Abstract

In this study, an excellent phosphate adsorbent was prepared for removing phosphate to an extremely low concentration. The La(OH)3 nano-rods stabilizing in polyacrylonitrile (PAN) nanofibers (PLNFs) were prepared by electrospinning and a subsequent in situ precipitation. PAN nanofibers were employed as the matrix of the composite nanofibers, where the well-dispersed La(OH)3 nano-rods were encapsulated as the active species for highly efficient phosphate capture owing to the strong binding between phosphate and lanthanum. On account of the nano-structure, the maximum phosphate adsorption capacity was 151.98 mg P/g (La), much higher than the result of La(OH)3 nano-crystal, produced by precipitation without PAN or any organic surfactants. Moreover, the PLNFs could remove phosphate (2 mg P/L) to an extremely low concentration within 20 min, which could lead to a nutrient deficient condition to protect water quality and ecosystem. The optimization of PLNFs design was implemented through parameter adjustment of electrospinning. Lanthanum salt content, humidity, concentration of solution and applied voltage were chosen to analyze the influences on the composition, diameter and morphology of the nanofibers, giving the result that the most effective adsorbent was the PLNFs with spider-web-like nano-structures.