Abstract
SiGe alloys are a promising material for highly reliable, human-friendly thin-film thermoelectric generators for micro-energy harvesting. However, it is difficult to obtain high performances at low thermal budgets in SiGe layers, especially in n-type materials. Ag-induced layer exchange enables the synthesis of Si1-xGex (x: 0-0.3) layers at 500 °C and dynamically controls the Fermi level owing to the self-organizing manner of impurity doping during the layer exchange. Intrinsic, p-type (hole concentration >1019 cm-3), and highly n-type (electron concentration >1020 cm-3) SiGe layers are obtained using pure Ag, B-doped Ag, and As-doped Ag, respectively. Owing to the high carrier concentrations, the thermoelectric power factor at room temperature exhibits high values: 230 μW m-1 K-2 for the p-type and 1000 μW m-1 K-2 for the n-type. The latter value is the highest reported power factor at room temperature for SiGe formed below 1000 °C. The dimensionless figure of merit is determined to be 0.19 from the power factor and the thermal conductivity of 1.6 W m-1 K-1. A thermoelectric generator fabricated with the low-temperature SiGe layers demonstrates a relatively large output for thin films (50 nm): 1.4 nW at room temperature with a temperature difference of 15 °C.
Cite
CITATION STYLE
Tsuji, M., Murata, M., Yamamoto, A., Suemasu, T., & Toko, K. (2020). Thin-film thermoelectric generator based on polycrystalline SiGe formed by Ag-induced layer exchange. Applied Physics Letters, 117(16). https://doi.org/10.1063/5.0021880
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.