Analisis Perbandingan Perhitungan Volume Bersih Galian dan Timbunan (Net Volume) dengan Metode Trapezoidal dan Borrow Pit pada Perangkat Lunak Autocad Civil 3D

Abstract

In the world of coal mining, the term joint survey is known. In the joint survey, the parameter of payment by the owner to the contractor is used as net volume, therefore, it must be measured and calculated by the appropriate method. Currently, software that supports mining activities is growing. Various software have their own advantages and disadvantages. In this research, we will calculate the net volume with data from one of the pits in the mining area of PT Anugerah Bara Kaltim which is cut into 3 parts, namely pits A, B, and C, the volume calculation is done using the Trapezoidal and Borrow Pit methods on the device. AutoCAD Civil 3D software where the results of each method will be compared to the manual count value as a reference with reference to the tolerance of ASTM (American Society for Testing and Materials) in 2002, which is the maximum percentage difference in volume calculation results, which is 2.78%, then it will analyzed which method is appropriate to use in the work of calculating the volume of coal mines. In the volume calculation process, 2 treatments were given, namely by changing the section interval for the trapezoidal method and changing the grid interval for the borrow pit method, from the volume calculation results obtained the average value of various volume differences, namely the borrowpit method of 1.911%, and the trapezoidal method. by 0.427%. In the calculation of the trapezoidal method, the smaller the section interval made, the calculation results will be closer to the reference volume. In the calculation of the borrow pit method, the smaller the grid interval that is made, the calculation results will be closer to the reference volume