Theoretical and experimental aspects regarding the forced mounting of a cylinder containing the electronics of a mini submarine

Abstract

The underwater robot is part of a project with “terrestrial–maritime” collaborative robots, whose mission is recognition and rescue. From a structural point of view, some small changes were made in this study to the original robot. These changes consisted of making supports to hold the two plexiglass tubes, since the tube containing the battery system is larger. A larger tube was chosen because the aim was to increase the travel autonomy of the mini remotely operated vehicle (ROV). The mini submarine will move in an unstructured environment and will be able to reach a depth of 100 m. The purpose of the article is to present a point of view regarding the effect of the behavior of the mini ROV on tensions produced by the forced assembly of the sealing cover of the cylinder containing its command-and-control system. Both the gripping elements and the sealing lids are made using 3D printing technology, and the material used is polylactic acid (PLA). For the numerical analysis, the finite element method is used in both static and dynamic conditions. The results of this work refer to the field of tensions and displacements. The main conclusions emphasize the fact that the gripping performed for sealing is influenced by the usage of oiled mechanisms.