Ultrathin Paper Microsupercapacitors for Electronic Skin Applications

Abstract

Ultrathin devices are rapidly developing for skin-compatible medical applications and wearable electronics. Powering skin-interfaced electronics requires thin and lightweight energy storage devices, where solution-processing enables scalable fabrication. To attain such devices, a sequential deposition is employed to achieve all spray-coated symmetric microsupercapacitors (μSCs) on ultrathin parylene C substrates, where both electrode and gel electrolyte are based on the cheap and abundant biopolymer, cellulose. The optimized spraying procedure allows an overall device thickness of ≈11 µm to be obtained with a 40% active material volume fraction and a resulting volumetric capacitance of 7 F cm−3. Long-term operation capability (90% of capacitance retention after 104 cycles) and mechanical robustness are achieved (1000 cycles, capacitance retention of 98%) under extreme bending (rolling) conditions. Finite element analysis is utilized to simulate stresses and strains in real-sized μSCs under different bending conditions. Moreover, an organic electrochromic display is printed and powered with two serially connected μ-SCs as an example of a wearable, skin-integrated, fully organic electronic application.