Sorptive testing of mortars with varying water-cement ratios

Abstract

The article presents the results of studies on sorption performed on three samples of mortars with similar density of about 2,000 kg/m3. The tested mortars differed in their water-to-cement ratio. Three levels of w/c ratio were adopted that were respectively: 0.5; 0.55 and 0.6. The prepared mortars were cut into samples with a thickness of 1 cm, dried to constant weight at a temperature of 105°C and insulated on the side surface with silicone. The experiment was carried out at a temperature of 25°C and at six different levels of relative humidity φ 12, 33, 54, 76, 85, 98%. Relative humidity was provided by saturated solutions of the appropriate salts: LiCl (φ 12%), MgCl2 (φ 33%), Mg(NO3)2 (φ 53%), NaCl (φ 76%), KCl (φ 85%), K2SO4 (φ 98%). The adopted level of temperature and range of relative humidity meet the hygrothermal conditions which tend to affect the cement mortar in real life. The long-term measurement results were used to assess the behaviour of the tested mortars under various conditions of moisture and to determine the equilibrium sorptive humidity.