An Experimental Study on the Fine Particle Emissions of Brake Pads According to Different Conditions Assuming Vehicle Deceleration with Pin-on-Disc Friction Test

Abstract

Fine particles from vehicles occur in a range of particulate matter (PM) sizes and influence the roadside atmosphere. The contribution of fine dust from automobiles to road pollution has reportedly been extremely high. Researchers have estimated that non-exhaust fine dust originating from brakes, tires, clutches, and road surface wear rate is increasing. Several studies have shown that brake pads account for a significant proportion of non-exhaust emissions. In this study, a friction test using vehicle brake pads was carried out with a friction tester to reveal the harmfulness of brake pad particles by the driver’s driving habits. Conditions were made considering the pressure, vehicle speed, and temperature and assuming the amount of deceleration of the vehicle. Particle collection devices were used to analyze the concentration of number and the mass distribution of particles produced in the experiment, with a range from 6 nm to 7.3 μm to gauge the toxicity of particles. The results showed that the number concentration of fine particles tended to increase linearly with changes in vehicle deceleration (braking energy) in the particle diameter region around 0.75–7.3 μm. The number concentration of fine particles tended to increase exponentially in the particle diameter region around 71–120 nm. The rapid occurrence of ultrafine particles in nanometers varied depending on the test conditions.