Micro-fiber-optic acoustic sensor based on high-Q resonance effect using Fabry-Pérot etalon

  • Chen J
  • Xue C
  • Zheng Y
  • et al.
50Citations
Citations of this article
11Readers
Mendeley users who have this article in their library.
Get full text

Abstract

A micro-fiber-optic acoustic sensor based on the high-quality-factor (high-Q) resonance effect that uses a Fabry-Pérot etalon (FPE) is presented in this study. The device has been demonstrated experimentally to be a high-sensitivity acoustic sensor with a large dynamic range over a wide frequency band. Optical contact technology was used to improve the robustness of the FPE, which consists of two parallel lenses with high reflectivity exceeding 99%. An acoustic signal detection system based on phase modulation spectrum technology was also constructed. A stable and high-Q value of 10 6 was measured for the FPE. As a result, high sensitivity of 177.6 mV/Pa was achieved. Because of the change in the refractive index of the air when it is modulated by the acoustic waves, a frequency response of 20 Hz–70 kHz with flatness of ±2 dB was obtained and a large dynamic range of 115.3 dB was measured simultaneously. The excellent performance of the device will be beneficial for optical acoustic sensing.

Cite

CITATION STYLE

APA

Chen, J., Xue, C., Zheng, Y., Wu, L., Chen, C., & Han, Y. (2021). Micro-fiber-optic acoustic sensor based on high-Q resonance effect using Fabry-Pérot etalon. Optics Express, 29(11), 16447. https://doi.org/10.1364/oe.418736

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free