Laboratory Reconstructions of Real-world Bicycle Helmet Impacts

12Citations
Citations of this article
30Readers
Mendeley users who have this article in their library.
Get full text

Abstract

The best way to prevent severe head injury when cycling is to wear a bike helmet. To reduce the rate of head injury in cycling, knowing the nature of real-world head impacts is crucial. Reverse engineering real-world bike helmet impacts in a laboratory setting is an alternative to measuring head impacts directly. This study aims to quantify bike helmet damage using computed tomography (CT) and reconstruct real-world damage with a custom, oblique test rig to recreate real-world impacts. Damaged helmets were borrowed from a helmet manufacturer who runs a helmet warranty program. Each helmet was CT-scanned and the damage metrics were quantified. Helmets of the same model and size were used for in-lab reconstructions of the damaged helmets where normal velocity, tangential velocity, peak linear acceleration (PLA) and peak rotational velocity (PRV) could be measured. The damage metrics of the in-lab dropped helmets were quantified using the same CT scanning process. For each case, a multiple linear regression (MLR) equation was created to define a relationship between the quantified damage metrics of the in-lab tested helmets and the associated measured impact velocities and kinematics. These equations were used to predict the impact kinematics and velocities from the corresponding real-world damaged helmet based on the damage metrics from the original damaged helmet. Average normal velocity (3.5 m/s), tangential velocity (2.5 m/s), PLA (108.0 g), PRV (15.7 rad/s) were calculated based on a sample of 23 helmets. Within these head impact cases, five notes reported a concussion. The difference between the average PLA and PRV for concussive cases versus other impacts were not significantly different, although the average impact kinematics for the concussive cases (PLA = 111.4 g, PRV = 18.5 rad/s) were slightly higher than the remaining cases (PLA = 107.1 g, PRV = 15.0 rad/s). The concussive cases were not indicative of high magnitude impact kinematics.

Cite

CITATION STYLE

APA

Harlos, A. R., & Rowson, S. (2021). Laboratory Reconstructions of Real-world Bicycle Helmet Impacts. Annals of Biomedical Engineering, 49(10), 2827–2835. https://doi.org/10.1007/s10439-021-02860-6

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free