Dual-functional ultraviolet photodetector with graphene electrodes on AlGaN/GaN heterostructure

68Citations
Citations of this article
33Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

A dual-functional ultraviolet (UV) photodetector with a large UV-to-visible rejection ratio is presented, in which interdigitated finger-type two-dimensional graphene electrodes are introduced to an AlGaN/GaN heterostructure. Two photocurrent generation mechanisms of photovoltaic and photoconductive dominances coexist in the device. The dominance of the mechanisms changes with the induced bias voltage. Below a threshold voltage, the device showed fairly low responsivities but fast response times, as well as a constant photocurrent against the induced bias. However, the opposite characteristics appeared with high bias voltage. Specifically, above the threshold voltage, the device showed high responsivities with additional gain, but slow rise and recovery times. For instance, the responsivity of 10.9 A/W was observed with the gain of 760 at the induced bias voltage of 5 V. This unique multifunctionality enabled by the combination of an AlGaN/GaN heterostructure with graphene electrodes facilitates the development of a single device that can achieve multiple purposes of photodetection.

Cite

CITATION STYLE

APA

Pandit, B., Schubert, E. F., & Cho, J. (2020). Dual-functional ultraviolet photodetector with graphene electrodes on AlGaN/GaN heterostructure. Scientific Reports, 10(1). https://doi.org/10.1038/s41598-020-79135-y

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free