Suppressing hydrogen evolution by aqueous silicon powder dispersions by controlled silicon surface oxidation

8Citations
Citations of this article
17Readers
Mendeley users who have this article in their library.

Abstract

Aqueous silicon dispersions are used to produce pyrotechnic time delay compositions. The propensity of silicon to react with water and to produce hazardous hydrogen gas must be suppressed. To this end, the effect of air heat treatment temperature on the rate of corrosion of silicon was investigated. It was found that four hour heat treatments at temperatures below 350 °C provided significant passivation. This is attributed to the removal of the hydroxyl groups present on the SiO2 surface scale layer. It was found that thickening the silica layer, by heat treatment at higher temperatures, causes a further reduction in the amount of hydrogen released. However, differential thermal analysis (DTA) studies showed that excessive silicon surface oxidation increased the ignition temperature and reduced the heat release of a near-stoichiometric silicon-lead chromate pyrotechnic composition. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cite

CITATION STYLE

APA

Tichapondwa, S. M., Focke, W. W., Del Fabbro, O., & Muller, E. (2013). Suppressing hydrogen evolution by aqueous silicon powder dispersions by controlled silicon surface oxidation. Propellants, Explosives, Pyrotechnics, 38(1), 48–55. https://doi.org/10.1002/prep.201100111

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free