Solid Lubrication on Hard Metal Specimens with Micropits Under Normal and Elevated Temperatures

Abstract

Solid lubrication in tribological applications was studied on hard metal specimens with micropits fabricated using metal injection molding (MIM). This study investigated synergy effects of paraffin wax mixed with 5 wt% MoS2 on the lubricating potential both under normal and elevated temperatures. Pin-on-plate sliding tests were performed on a CSM tribometer in which WC–Co pins oscillated against microstructured and flat reference WC–Co specimens under 10 N applied normal load. Surface morphology characterization of test specimens was carried out before and after tribological tests using scanning electron microscopy. Solid paraffin wax displayed enhanced lubrication compared to solid paraffin wax mixed with 5 wt% MoS2 on micropit specimens under normal temperature. On the contrary, under heating conditions, solid paraffin mixed with 5 wt% MoS2 significantly reduced the dynamic coefficient of friction (COF) values for both flat and micropit specimens. The results showed that the micropits in textured specimens can be used as a reservoir for the lubricant that can significantly reduce friction compared to flat reference specimens. Graphical Abstract: [Figure not available: see fulltext.]