Abstract
Se-doped CdO thin films were prepared on p-Si substrates via spin coating. Morphological, structural and absorption measurements of CdO:Se film was performed. Then, a CdS:Se/p-Si heterojunction was produced by coating CdO:Se film on a p-Si substrate using spin coating method. From the I-V measurements, it has been seen that the device has a very good rectification feature in the dark, at room temperature. In order to investigate the performance of the device under light, a detailed analysis was performed by performing I-V measurements under ultraviolet (UV) light (365 and 395 nm, 10 mW cm−2) and different intensities of visible light (between 10 and 125 mW cm−2) as well as ambient light. It was observed that the CdO:Se/p-Si heterojunction performed well under both illumination conditions. The maximum responsivity and specific detectivity values were obtained as 0.72 and 4.47 A W−1 and 3.31 × 109 and 2.05 × 1010 Jones for visible and UV regions, respectively. It was also seen that the device exhibited very high performance and stability even after 160 days.
Author supplied keywords
Cite
CITATION STYLE
Şakar, B. C., Orhan, Z., Yıldırım, F., & Aydoğan. (2023). Long‐term stable and high responsivity visible-ultraviolet photodetector of Se-doped CdO film on Si by spin coating. Journal of Physics D: Applied Physics, 56(34). https://doi.org/10.1088/1361-6463/acd461
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.