Actuator faults are inevitable in small reverse osmosis desalination plants. They may cause energy losses and reduce the quality of the freshwater, which may endanger human life. Model predictive control (MPC) is a model-based approach widely used to control process systems such as reverse osmosis, while considering a set of constraints. In this paper, three methods of predictive model controllers are considered for the control of a multi-input multi-output (MIMO) reverse osmosis desalination system in the presence of noise, model mismatch, and actuator fault. Formulation of enhanced constrained receding horizon predictive control via bounded data uncertainties (CRHPCBDU) are extended for linear time-invariant MIMO systems. Permeate flow rate and conductivity of the water produced are controlled by a retentate valve and a bypass valve, respectively. The simulation results show the robustness of the suggested approach in the presence of both noise and uncertainties. CRHPC-BDU has a better performance subject to systems with model uncertainty and actuator fault up to a reasonable limit. By increasing the actuator fault up to 34%, the robustness of CRHPC-BDU is further highlighted in permeate conductivity, where the fluctuations of permeate conductivity dampen sooner than in the other two controllers.
CITATION STYLE
Kargar, S. M., & Mehrad, R. (2020). Robust model predictive control for a small reverse osmosis desalination unit subject to uncertainty and actuator fault. Water Science and Technology: Water Supply, 20(4), 1229–1240. https://doi.org/10.2166/ws.2020.043
Mendeley helps you to discover research relevant for your work.