Feedback compensated 10 kW solid-state pulsed power amplifier at 352 MHz for particle accelerators

Abstract

This paper presents the first results of an in-house developed low-level radio frequency (LLRF) system and a 10 kW solid state power amplifier (SSPA). The design approach for the SSPA is based on eight resonant single-ended kilowatt modules combined using a planar Gysel combiner. Each of the single-ended modules is based on a two-stepped impedance resonant matching, allowing for harmonic suppression, simple design for massive production, and high-performance design. A design methodology to tune SSPA modules for optimum combining efficiency is presented thoroughly in the time domain. We characterize the power droop due to capacitor banks in the time domain. In open loop of compensation, it is about 1 kW within the pulse of peak value 10 kW and a duration of 3.5 ms. This may lead to the beam instability of the accelerator as particles are not provided with the same energy during the pulse. By incorporating our LLRF system, it is demonstrated that the objective of amplitude and phase stability is satisfied, as required in the European Spallation Source proton accelerator. The presented design also offers the advantages of compact form factor, low complexity, and better performance. In closed loop compensation, the variation of amplitude (pulse droop) is measured on the order of 20 W, which is equivalent to 0.2% at 10 kW peak output power.