Avaliação das tensões residuais em juntas soldadas de inconel 625 obtidas através da soldagem por fricção e mistura mecânica

Abstract

The use of noble materials is a basic requirement in applications where an aggressive environment such as offshore industry and nuclear energy. In this scenario, the Inconel 625 is often used as clad material in rigid pipes. Thus, nickel superalloys play a fundamental role in the deepwater exploration fields and, therefore, understanding of modern welding methods applied to these alloys and their consequences in the residual stress states is very important. Hence, this work evaluates the residual stress distributions after Friction Stir Welding (FSW) applied on Inconel 625 sheets. FSW was performed with tool rotational speed in the range of 200 to 1200 rpm and welding speed constant. Measurements of superficial residual stresses were investigated by X-ray Diffraction. In addition, macrostructures and heat input were evaluated. Although there are only few reports related to FSW applied on Inconel alloys, probably due to this welding process difficulty, it has been regarded that there is cumulative application of a solid state welding as an excellent alternative for nickel superalloys. The results showed that different welding parameters produced distinctly welded joints and consequently changes in the residual stress distributions. Finally, an increase in the tool rotation speed increased the residual stress in the stir zone.