Abstract
Ni2+ is a highly toxic above 0.07 mg/L and its removal is of high significance. The biosorption of Ni2+ onto medlar male flowers (MMF) was studied in relation with the physical parameters like pH, contact time, biosorbent dosage, Ni2+ concentration and temperature. The interaction biosorbent-Ni2+ was examined by the FTIR technique. The equilibrium was achieved within 40 min and the data were well fitted by the Langmuir and Redlich-Peterson (R-P) models. The maximum Ni2+ uptake capacity was 17.073 mg/g at 25°C and the Ni2+ removal follows a pseudo-second order kinetic with activation energy of 13.3 kJ/mol. The thermodynamic parameters: ΔS°, ΔH° and ΔG° showed that the biosorption was spontaneous and endothermic. MMF was used as a post treatment technique and the biosorption was coupled with the visible light driven Ni2+ reduction over the spinel ZnMn2O4. The effect of the pH, ZnMn2O4 loading and light intensity on the photoactivity was investigated. 77.5% of Ni2+ was reduced after ∼140 min under optimal conditions. The Ni2+ removal reached a rate conversion of 96% of with the coupled system biosorption/photocatalysis is very promising for the water treatment. © 2014 Chergui et al.; licensee BioMed Central Ltd.
Author supplied keywords
Cite
CITATION STYLE
Chergui, A., Madjene, F., Trari, M., & Khouider, A. (2014). Nickel removal by biosorption onto medlar male flowers coupled with photocatalysis on the spinel ZnMn2O4. Journal of Environmental Health Science and Engineering, 12(1). https://doi.org/10.1186/2052-336X-12-13
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.