A new technique for the direct detection of HO2 radicals using bromide chemical ionization mass spectrometry (Br-CIMS): Initial characterization

Abstract

Hydroperoxy radicals (HO2/ play an important part in tropospheric photochemistry, yet photochemical models do not capture ambient HO2 mixing ratios consistently. This is likely due to a combination of uncharacterized chemical pathways and measurement limitations. The indirect nature of current HO2 measurements introduces challenges in accurately measuring HO2; therefore a direct technique would help constrain HOx chemistry in the atmosphere. In this work we evaluate the feasibility of using chemical ionization mass spectrometry (CIMS) and propose a direct HO2 detection scheme using bromide as a reagent ion. Ambient observations were made with a high-resolution timeof- flight chemical ionization mass spectrometer (HR-ToFCIMS) in Atlanta over the month of June 2015 to demonstrate the capability of this direct measurement technique. Observations displayed expected diurnal profiles, reaching daytime median values of ∼5 ppt between 2 and 3 p.m. local time. The HO2 diurnal profile was found to be influenced by morning-time vehicular NOx emissions and shows a slow decrease into the evening, likely from non-photolytic production, among other factors. Measurement sensitivities of approximately 5.1±1.0 cps ppt-1 for a bromide ion (79Br-) count rate of 106 cps were observed. The relatively low instrument background allowed for a 3σ lower detection limit of 0.7 ppt for a 1 min integration time. Mass spectra of ambient measurements showed the 79BrHO2- peak was the major component of the signal at nominal mass-to-charge 112, suggesting high selectivity for HO2 at this mass-to-charge. More importantly, this demonstrates that these measurements can be achieved using instruments with only unit mass resolution capability.