Abstract
Development of an Anammox (anaerobic ammonium oxidation) process using non-acclimatized sludge requires a long start-up period owing to the very slow growth rate of Anammox bacteria. This article addresses the issue of achieving a shorter start-up period for Anammox activity in a well-mixed continuously stirred tank reactor (CSTR) using non-acclimatized anaerobic sludge. Proper selection of enrichment conditions and low stirring speed of 30 ± 5 rpm resulted in a shorter start-up period (82 days). Activity tests revealed the microbial community structure of Anammox micro-granules. Ammonia-oxidizing bacteria (AOB) were found on the surface and on the outer most layers of granules while nitrite-oxidizing bacteria (NOB) and Anammox bacteria were present inside. Fine-tuning of influent NO2-/NH 4+ ratio allowed Anammox activity to be maintained when mixed microbial populations were present. The maximum nitrogen removal rate achieved in the system was 0.216 kg N/(m3 day) with a maximum specific nitrogen removal rate of 0.434 g N/(g VSS day). During the study period, Anammox activity was not inhibited by pH changes and free ammonia toxicity. © 2010 Society for Industrial Microbiology.
Author supplied keywords
Cite
CITATION STYLE
Bagchi, S., Biswas, R., & Nandy, T. (2010). Start-up and stabilization of an Anammox process from a non-acclimatized sludge in CSTR. Journal of Industrial Microbiology and Biotechnology, 37(9), 943–952. https://doi.org/10.1007/s10295-010-0743-4
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.