Abstract
This paper reports on contactless microparticle manipulation including single-particle controlled trapping, transportation, and patterning via single beam acoustic radiation forces. As the core component of single beam acoustic tweezers, a needle type ultrasonic transducer was designed and fabricated with center frequency higher than 300 MHz and -6 dB fractional bandwidth as large as 64%. The transducer was built for an f-number close to 1.0, and the desired focal depth was achieved by press-focusing technology. Its lateral resolution was measured to be better than 6.7 μm by scanning a 4 μm tungsten wire target. Tightly focused acoustic beam produced by the transducer was shown to be capable of manipulating individual microspheres as small as 3 μm. "USC" patterning with 15 μm microspheres was demonstrated without affecting nearby microspheres. These promising results may expand the applications in biomedical and biophysical research of single beam acoustic tweezers.
Cite
CITATION STYLE
Fei, C., Li, Y., Zhu, B., Chiu, C. T., Chen, Z., Li, D., … Zhou, Q. (2016). Contactless microparticle control via ultrahigh frequency needle type single beam acoustic tweezers. Applied Physics Letters, 109(17). https://doi.org/10.1063/1.4966285
Register to see more suggestions
Mendeley helps you to discover research relevant for your work.