Monitoring of the Initial Stages of Diamond Growth on Aluminum Nitride Using In Situ Spectroscopic Ellipsometry

3Citations
Citations of this article
13Readers
Mendeley users who have this article in their library.

This article is free to access.

Abstract

The high thermal conductivity of polycrystalline diamond makes it ideally suited for thermal management solutions for gallium nitride (GaN) devices, with a diamond layer grown on an aluminum nitride (AlN) interlayer atop the GaN stack. However, this application is limited by the thermal barrier at the interface between diamond and substrate, which has been associated with the transition region formed in the initial phases of growth. In this work, in situ spectroscopic ellipsometry (SE) is employed to monitor early-stage microwave plasma-enhanced chemical vapor deposition diamond growth on AlN. An optical model was developed from ex situ spectra and applied to spectra taken in situ during growth. Coalescence of separate islands into a single film was marked by a reduction in bulk void fraction prior to a spike in sp2 fraction due to grain boundary formation. Parameters determined by the SE model were corroborated using Raman spectroscopy and atomic force microscopy.

Cite

CITATION STYLE

APA

Leigh, W., Mandal, S., Cuenca, J. A., Wallis, D., Hinz, A. M., Oliver, R. A., … Williams, O. (2023). Monitoring of the Initial Stages of Diamond Growth on Aluminum Nitride Using In Situ Spectroscopic Ellipsometry. ACS Omega, 8(33), 30442–30449. https://doi.org/10.1021/acsomega.3c03609

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free