Temperature and Strain Rate Dependence on the Tensile Mechanical Properties, Constitutive Equations, and Fracture Mechanisms of MarBN Steel

Abstract

The effect of strain rate and temperature on the thermomechanical behavior and microstructure of MarBN steel is studied with the strain rates of 5 × 10−3 and 5 × 10−5 s−1 from room temperature (RT) to 630 °C. At high strain rates of 5 × 10−3 s−1, the Holloman and Ludwigson equations can better predict tensile plastic properties. In contrast, under low strain rates of 5 × 10−5 s−1, coupling of the Voce and Ludwigson equations appears to predict the flow relationship at RT, 430, and 630 °C. However, the deformation microstructures have the same evolution behavior under strain rates and temperatures. Geometrically necessary dislocations appear along the grain boundaries and increase the dislocation density, which results in the formation of the low-angle grain boundaries and a decrease in the number of twinning. The strengthening sources of MarBN steel include grain boundary strengthening, dislocation interactions, and multiplication. The fitted R2 values of these models (JC, KHL, PB, VA, ZA) to plastic flow stress at 5 × 10−5 s−1 are greater than 5 × 10−3 s−1 for MarBN steel. Due to the flexibility and minimum fitting parameters, the phenomenological models of JC (RT and 430 °C) and KHL (630 °C) give the best prediction accuracy under both strain rates.